[j-nsp] ISIS overload bit settings

[Daniel Roesen]

On Mon, Sep 29, 2003 at 06:21:18PM +0200, Daniel Roesen wrote:
> On Mon, Sep 29, 2003 at 12:15:45PM +0100, Umar.Ahmed at equinoxsolutions.com wrote:
> > Just trawled through the Juniper website trying to find out if JunOS
> > supports anything similar to the "on-startup" or "wait-for-bgp" command.
> > This makes IS-IS wait for BGP to converge before clearing the overload bit.
> 
> Doesn't exist (sadly).

Sorry, I have to clarify: something like "on-startup" exists
as "set protocols isis overload [timeout <seconds>]". But there is
nothing which watches for BGP keepalives in order to have a heuristic
for "BGP converged".


Best regards,
Daniel