[j-nsp] BGP Tweaking query

[Umar Ahmed]

Set the local pref for those prefixes to be the highest - so that it always
exits using that interface to that particular upstream provider.

U. 

-----Original Message-----
From: devendra.vyas at relianceinfo.com [mailto:devendra.vyas at relianceinfo.com]

Sent: 08 April 2004 10:08
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] BGP Tweaking query





if i have some prefixes that i announce and i am multihomed -  i want a
particular pool to always exit (outgoing) to the internet via a particular
link.

how can i tweak bgp (wrt juniper)for solving this.

Thanks & Regards,

Devendra Vyas



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp


**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with
the content of this email please e-mail to: e-security.support at vanco.co.uk

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
**********************************************************************