[j-nsp] Juniper Firewall Logging

Julie McGourty julie at ednetisp.net
Thu Apr 8 05:18:02 EDT 2004


Does anyone know of a way to tailor the syslogging on the M40s to log
specific data about firewall violations? We have got a couple of M40s which
are set up to log to our syslog server re: violations of firewall rules.
However, the data we receive in syslog only tells us which interface the
packet has been blocked on, and does not tell us the name of the firewall
filter which blocked the packet. It would be useful if the logging could be
set up to display the name of the firewall filter, as we sometimes have more
than one filter on each interface.

Does anyone know of any way to set this up?

----
Julie McGourty
edNET
t: 0845 1199 900
d: 0131 514 4011

-- 

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of edNET or lightershade ltd. Finally, the
recipient should check this email and any attachments for the presence of
viruses.  edNET and lightershade ltd accepts no liability for any damage
caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by edNET.


More information about the juniper-nsp mailing list