[j-nsp] BGP Tweaking query

[rasmus (posts)]

Hi,

You can use FBF (Filter-Based Forwarding) to achieve that,

Configure a source-prefix list for matching the traffic then send the
traffic to a routing instance that has only a default route to that  uplink
interface,

Also you can configure a bigger mertric for the other uplink for backup.

You can find extra information in : 

 swconfig-routing doc :  Routing Instances --> Routing Unstances
configuration Guidelines --- > Configure Filter-Based Forwarding

Regards,

Rasmus Levent Ogut




> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> devendra.vyas at relianceinfo.com
> Sent: Thursday, April 08, 2004 12:08 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] BGP Tweaking query
> 
> 
> 
> 
> 
> if i have some prefixes that i announce and i am multihomed - 
>  i want a particular pool to always exit (outgoing) to the 
> internet via a particular link.
> 
> how can i tweak bgp (wrt juniper)for solving this.
> 
> Thanks & Regards,
> 
> Devendra Vyas
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>