[j-nsp] juniper pingmib test configaration

[Bala Venkata]

First off, I see in Juniper docs that you need to setup the row in
pingCtlTable with a 'minimu' of 4 columns values (pingCtlOwnerIndex,
pingCtlTestName, pingCtlTargetAddress and pingCtlRowStatus)
I don't see test name and owner index in your snippet, did
you try setting them too ?

I would also double check to make sure the VRF name matches
in both ur SNMP set and in device config (sometimes cAse-sensitivity
takes two or more read-thru's :--))


m2c,

/bala

> Hi All,
>  
> in juniper Router , I'm trying to set pingmib test(RFC  2925) from a PE to another PE . 
> iam settting  
> ==========
> pingCtlTargetAddress  === xxx.xxx.xxx.xxx 
> pingCtlAdminStatus   ==== enabled(1) 
> pingCtlRowStatus     ===== createAndGo(4) 
> 
> on Source Router and able to configure the test between two PEs.
>  
>  
> Problems is ,when iam trying set the VRF based test on Source Router. 
> means setting   (  jnxPingCtlRoutingInstanceName )  to VRF instance name on the source Router , snmpset giving error saying [inconsistentname].
>  
> please help to resolve this problem.
>  
> Thanks in advance,
>  
> Koti.