[j-nsp] Loopback Interfaces

[av srikant]

Thanks,

So are you coming to the point that i have to use same Loopback0 id for all 
the OSPF,BGP neighbour relationship's?

Regards,
Srikant

>From: "Bostjan Fele" <bostjan.fele at smart-com.si>
>To: "av srikant" <srikant_av at hotmail.com>,<juniper-nsp at puck.nether.net>
>Subject: RE: [j-nsp] Loopback Interfaces
>Date: Wed, 1 Dec 2004 08:45:41 +0100
>
>Youo cannot create additional loopback interfaces. Try applying additional
>addresses on lo0.
>
>Regards,
>Bostjan
>
>--------------------------------------------------------
>Bo¹tjan FELE
>CCIE #12594, InfoSec, JNCIS-M
>E-mail: bostjan.fele at smart-com.si
>Smart Com, d.o.o.
>Brnciceva 45, 1001 Ljubljana, Slovenia
>URL: http://www.smart-com.si
>Tel.:  +386-1-5308-312
>Fax.: +386-1-5611-571
>Mob.: +386-41-399-363
>---------------------------------------------------------
>
>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net
>[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of av srikant
>Sent: Wednesday, December 01, 2004 7:52 AM
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] Loopback Interfaces
>
>Hi All,
>
>what is the command to create a new Loopback interfaces  ( with any number)
>in Juniper M40e Series Router?
>
>Regards,
>srikant
>
>_________________________________________________________________
>NRIs!
>http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm
>Choose values with free money transfers!
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>

_________________________________________________________________
The happening world of BPO! Know all that you need to know! 
http://www.bpowatchindia.com/msn/ Keep in step with what’s hot!