[j-nsp] Loopback Interfaces
Bostjan Fele
bostjan.fele at smart-com.si
Wed Dec 1 07:03:35 EST 2004
Hi,
For BGP you can use command local-address and specify it. But from
manageability point of view, I prefer having same IP address for OSPF router
ID, for IBGP peering, etc. But that is my personal opinion. What are
actually trying to accomplish?
Regards,
Boštjan
--------------------------------------------------------
Boštjan FELE
CCIE #12594, InfoSec, JNCIS-M
E-mail: bostjan.fele at smart-com.si
Smart Com, d.o.o.
Brnciceva 45, 1001 Ljubljana, Slovenia
URL: http://www.smart-com.si
Tel.: +386-1-5308-312
Fax.: +386-1-5611-571
Mob.: +386-41-399-363
---------------------------------------------------------
-----Original Message-----
From: av srikant [mailto:srikant_av at hotmail.com]
Sent: Wednesday, December 01, 2004 9:13 AM
To: bostjan.fele at smart-com.si; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Loopback Interfaces
Thanks,
So are you coming to the point that i have to use same Loopback0 id for all
the OSPF,BGP neighbour relationship's?
Regards,
Srikant
>From: "Bostjan Fele" <bostjan.fele at smart-com.si>
>To: "av srikant" <srikant_av at hotmail.com>,<juniper-nsp at puck.nether.net>
>Subject: RE: [j-nsp] Loopback Interfaces
>Date: Wed, 1 Dec 2004 08:45:41 +0100
>
>Youo cannot create additional loopback interfaces. Try applying additional
>addresses on lo0.
>
>Regards,
>Bostjan
>
>--------------------------------------------------------
>Boštjan FELE
>CCIE #12594, InfoSec, JNCIS-M
>E-mail: bostjan.fele at smart-com.si
>Smart Com, d.o.o.
>Brnciceva 45, 1001 Ljubljana, Slovenia
>URL: http://www.smart-com.si
>Tel.: +386-1-5308-312
>Fax.: +386-1-5611-571
>Mob.: +386-41-399-363
>---------------------------------------------------------
>
>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net
>[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of av srikant
>Sent: Wednesday, December 01, 2004 7:52 AM
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] Loopback Interfaces
>
>Hi All,
>
>what is the command to create a new Loopback interfaces ( with any number)
>in Juniper M40e Series Router?
>
>Regards,
>srikant
>
>_________________________________________________________________
>NRIs!
>http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm
>Choose values with free money transfers!
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>
_________________________________________________________________
Hey there NRIs! Desi news, films, ?n more! http://www.msn.co.in/nri/ Stay in
the loop!
More information about the juniper-nsp
mailing list