[j-nsp] Community Export/Import Configuration in MP-BGP

[Aditya Kaul]

1)
edit routing-instance ABC
instance-type vrf;
vrf-target target: 100:100

You can also define import and export policy like import/export map in
cisco.

2) [edit protocols bgp group xxxx neighbor a.b.c.d]
family inet-vpn {
        unicast;------------------>MP-BGP for L3VPN
   family l2vpn {
        unicast;--------------------->MP-BGP for L2VPN/VPLS
family inet {
        unicast;----------------------> BGP




                                                                                                                                              
                      "av srikant"                                                                                                            
                      <srikant_av at hotmail.com>        To:       juniper-nsp at puck.nether.net                                                   
                      Sent by:                        cc:       (bcc: Aditya Kaul/INFOCOMM/RIL)                                               
                      juniper-nsp-bounces at puck        Subject:  [j-nsp] Community Export/Import Configuration in MP-BGP                       
                      .nether.net               Importance: Normal  Sender's OU: Reliance |------------------|                                
                                                                                          | [ ] Confidential |                                
                                                                                          |------------------|                                
                      12/23/2004 02:49 PM                                                                                                     
                                                                                                                                              
                                                                                                                                              





Hi All,

Can somebody tell me what is the equilant configuration in JuniperM40e
Router runing JunOS 6.2 for the below commands we use Cisco Routers w.r.t
MP-BGP and VRF Import and VRF-Export

1)  ip vrf test
route-target both 123:1

2) nei x.y.z.a activate
    nei x.y.z.a send-community both

Regards,
Srikant

_________________________________________________________________
Don't know where to look for your life partner?
http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?74 Trust
BharatMatrimony.com

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp