[j-nsp] Community Export/Import Configuration in MP-BGP
Vladimir S. Blazhkun
xeroform at internet2.ru
Thu Dec 23 05:50:57 EST 2004
> Thanks ,
>
> But why should i define these command in the routing-options ? What does that
> mean
>
> routing-options {
> static {
> route 172.20.1.0/24 {
> next-hop 172.17.0.10;
> passive;
> }
This is just a simple example, you can use either static or dynamic routing in
MPLS/L3-VPN.
http://www.juniper.net/techpubs/software/junos/junos62/swconfig62-vpns/html/vpnl3-config.html
> Regards,
> Srikant
>
>> From: "Vladimir S. Blazhkun" <xeroform at internet2.ru>
>> To: av srikant <srikant_av at hotmail.com>
>> CC: juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] Community Export/Import Configuration in MP-BGP
>> Date: Thu, 23 Dec 2004 12:59:12 +0300 (MSK)
>>
>>
>>> Hi All,
>>>
>>> Can somebody tell me what is the equilant configuration in JuniperM40e
>>> Router runing JunOS 6.2 for the below commands we use Cisco Routers w.r.t
>>> MP-BGP and VRF Import and VRF-Export
>>>
>>> 1) ip vrf test
>>> route-target both 123:1
>>
>> routing-instances {
>> test {
>> instance-type vrf;
>> route-distinguisher 123:1;
>> vrf-import test-import;
>> vrf-export test-export;
>> routing-options {
>> static {
>> route 172.20.1.0/24 {
>> next-hop 172.17.0.10;
>> passive;
>> }
>> }
>> }
>> }
>>
>> policy-options {
>> policy-statement test-export {
>> term 1 {
>> from protocol static;
>> then {
>> community add test;
>> accept;
>> }
>> }
>> term 2 {
>> then reject;
>> }
>> }
>> policy-statement test-import {
>> term 1 {
>> from {
>> protocol bgp;
>> community test;
>> }
>> then accept;
>> }
>> term 2 {
>> then reject;
>> }
>> }
>> community test members target:123:1;
>> }
>>
>>> 2) nei x.y.z.a activate
>>> nei x.y.z.a send-community both
>>
>> community attribute will send as defined in export policy.
>>
>>> Regards,
>>> Srikant
--
Vladimir S. Blazhkun,
Lead IP NCC Specialist, OOO "PCS-Moscow",
Work phone: +7 095 7847617.
More information about the juniper-nsp
mailing list