[j-nsp] router not booting from flash
Hasanga Hendehewa (BR/EPA)
hasanga.hendehewa at ericsson.com
Wed Feb 4 05:06:58 EST 2004
the flash could be missing from the boot list.
use the following cmd to check,
root at slippery% sysctl machdep.bootdevs
If it does not, issue the following command (M5, M10, M20, M160):
root at slippery% sysctl -w
After hitting 'enter,' you should see:
To verify it has been entered in sysctl do the following:
root at router% sysctl -a | grep bootdev
Then, reboot the router.
This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.
E-mail including attachments is susceptible to data corruption, interruption, unauthorized amendment, tampering and viruses, and we only send and receive e-mails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the juniper-nsp