[j-nsp] router not booting from flash
daniel
daniel at claudius.demon.nl
Thu Feb 5 18:21:34 EST 2004
just to add to that; adding CF (or a harddisk for that matter) back on the bootlist is not necessarily what you want to do. Question is, why was it removed from the list in the first place. Might be worth going back through the messages.log to see if there's any specific errors related to the CF, or check the boot-messages (show system boot-messages).
-Daniel
On 21:06 Wed 04 Feb , Hasanga Hendehewa (BR/EPA) wrote:
> the flash could be missing from the boot list.
>
> use the following cmd to check,
>
> root at slippery% sysctl machdep.bootdevs
>
> machdep.bootdevs: pcmcia-flash,compact-flash,disk,lan
>
> If it does not, issue the following command (M5, M10, M20, M160):
>
> root at slippery% sysctl -w
> machdep.bootdevs=pcmcia-flash,compact-flash,disk,lan
>
> After hitting 'enter,' you should see:
>
> machdep.bootdevs: pcmcia-flash,compact-flash,disk,lan
>
> To verify it has been entered in sysctl do the following:
>
> root at router% sysctl -a | grep bootdev
>
> Then, reboot the router.
>
>
> This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.
>
> E-mail including attachments is susceptible to data corruption, interruption, unauthorized amendment, tampering and viruses, and we only send and receive e-mails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list