[j-nsp] problem with m40 harddrive

[Erik Haagsman]

Hi Daniel,

We didn't have a PCMCIA or LS handy, but creating a new filesystem and
dd'ing the first sectors from an M160 with the same RE (and copying the
label) got everything running just fine. It took a while to figure
everything out, but your learn as you go :-)

Cheers,

Erik

On Fri, 2004-02-06 at 00:26, daniel wrote:
> Erik, 
> 
> not sure if you ever got a reply on this. Recommended way to recover would be to simply install from PCMCIA or LS120 disk.
> 
> Cheers,
> -Daniel
> 
> On 11:58 Wed 28 Jan     , Erik Haagsman wrote:
> > Hi All,
> > 
> > We've been having problems with the harddrive on the RE of an M40. I've
> > created a new filsystem and fsck now marks it clean, but after rebooting
> > I get disk label errors and I still can't mount the ad1 devices.
> > Any clues on setting the disklabel correctly...?
> > When running disklabel -e it puts me in vi editing the label by hand,
> > but I'm not sure what to do with it and I'm not sure what file to use
> > for disklabel -R [disk] [protofile].
> > 
> > Any help greatly appreciated.
> > 
> > 
> > -- 
> > Erik Haagsman
> > Network Architect
> > We Dare BV
> > tel: +31(0)10-7507008
> > fax: +31(0)10-7507005
> > http://www.we-dare.nl
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
-- 
---
Erik Haagsman
Network Architect
We Dare BV
tel: +31.10.7507008
fax: +31.10.7507005
http://www.we-dare.nl