[j-nsp] problem with m40 harddrive

[daniel]

:)

-Daniel

On 00:33 Fri 06 Feb     , Erik Haagsman wrote:
> Hi Daniel,
> 
> We didn't have a PCMCIA or LS handy, but creating a new filesystem and
> dd'ing the first sectors from an M160 with the same RE (and copying the
> label) got everything running just fine. It took a while to figure
> everything out, but your learn as you go :-)
> 
> Cheers,
> 
> Erik
> 
> On Fri, 2004-02-06 at 00:26, daniel wrote:
> > Erik, 
> > 
> > not sure if you ever got a reply on this. Recommended way to recover would be to simply install from PCMCIA or LS120 disk.
> > 
> > Cheers,
> > -Daniel
> > 
> > On 11:58 Wed 28 Jan     , Erik Haagsman wrote:
> > > Hi All,
> > > 
> > > We've been having problems with the harddrive on the RE of an M40. I've
> > > created a new filsystem and fsck now marks it clean, but after rebooting
> > > I get disk label errors and I still can't mount the ad1 devices.
> > > Any clues on setting the disklabel correctly...?
> > > When running disklabel -e it puts me in vi editing the label by hand,
> > > but I'm not sure what to do with it and I'm not sure what file to use
> > > for disklabel -R [disk] [protofile].
> > > 
> > > Any help greatly appreciated.
> > > 
> > > 
> > > -- 
> > > Erik Haagsman
> > > Network Architect
> > > We Dare BV
> > > tel: +31(0)10-7507008
> > > fax: +31(0)10-7507005
> > > http://www.we-dare.nl
> > > 
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> -- 
> ---
> Erik Haagsman
> Network Architect
> We Dare BV
> tel: +31.10.7507008
> fax: +31.10.7507005
> http://www.we-dare.nl
> 
> 
>