[j-nsp] Part Numbers

[Aviva Garrett]

Hi Kashif,

The 750- part numbers are used by engineering and manufacturing. The P-
part numbers are model numbers that are used on the price list. Both are
officially recognized and equally preferred.

Thanks,
..Aviva

In message <53CF07EABA71C2448C8CC7C4B2C6F1FA07A08C24 at auscvexch1.ixc-comm.com>yo
u write:
> Hi All:
> 
> Can somebody from Juniper shed some light on what nomenclature for part numbe
  > rs should be
> used (i.e. is officially recognized by or is prefered by Juniper) e.g. 
> Should we use 750-000603 or P-4OC3-SON-SMIR for a quad OC-3 sonet PIC?
> 
> Thanks!
> -Kashif.
>  +++The information transmitted is intended only for the person or entity to 
  > which it is
> addressed and may contain confidential and/or privileged material.  Any revie
  > w,
> retransmission, dissemination or other use of, or taking of any action in rel
  > iance upon,
> this information by persons or entities other than the intended recipient is 
  > prohibited.
> If you received this in error, please contact the sender and destroy any copi
  > es of this
> document.+++
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp