[j-nsp] Does FE support 100M only?
erik at we-dare.net
Fri Feb 13 19:43:14 EST 2004
You can set both duplex as well as linkspeed at the interface level.
(using the link-mode and speed parameters).
Frankly, I wouldn't use auto-negotiate on a router, especially not when
connecting different brands of hardware (non-Juniper to a Juniper).
On Sat, 2004-02-14 at 01:32, Mike Sumrall wrote:
> I have a M5 with a 4X FE pic, here's the show chassis:
> PIC 0 REV 04 750-002992 HA7235 4x F/E, 100 BASE-TX
> Does this pic only support 100M? and not 10M? is it full or half
> duplex? and does it support autonegotiate?
> Mike Sumrall
> Integrated Communications Concepts
> Sr. Systems Engineer
> Work: 714-970-5011
> Cell: 714-234-3404
> msumrall at ic2net.net
We Dare BV
More information about the juniper-nsp