[j-nsp] Does FE support 100M only?

[Erik Haagsman]

Wow...sorry..when re-reading my post I realised that only applies to the
12 and 48 ports FE's. The 4 port only supports 100 mbit/s.

Cheers,

Erik

On Sat, 2004-02-14 at 01:43, Erik Haagsman wrote:
> You can set both duplex as well as linkspeed at the interface level.
> (using the link-mode and speed parameters). 
> Frankly, I wouldn't use auto-negotiate on a router, especially not when
> connecting different brands of hardware (non-Juniper to a Juniper).
> 
> Cheers,
> 
> Erik 
> 
> On Sat, 2004-02-14 at 01:32, Mike Sumrall wrote:
> > I have a M5 with a 4X FE pic, here's the show chassis:
> > 
> > PIC 0   REV 04  750-002992  HA7235   4x F/E, 100 BASE-TX
> > 
> > Does this pic only support 100M?  and not 10M?  is it full or half
> > duplex? and does it support autonegotiate?
> > 
> > Thanks,
> > 
> >  -Mike
> > 
> > Mike Sumrall
> > Integrated Communications Concepts
> > Sr. Systems Engineer
> > Work: 714-970-5011
> > Cell: 714-234-3404
> > msumrall at ic2net.net
-- 
---
Erik Haagsman
Network Architect
We Dare BV
tel: +31.10.7507008
fax: +31.10.7507005
http://www.we-dare.nl