[j-nsp] IQ ChSTM-1 channel capacity

Nic McCartney nic at gblx.net
Fri Feb 20 05:26:21 EST 2004


Not sure if it was tested with 6.2. Some colleagues of mine did do some
testing however I don't know if they went upto the limit of 768. I was told
by Juniper recently that Q-PIC capacity was 768 channels.
Can one of the Juniper folk on this list confirm?


Nic

-----Original Message-----
From: telecom at servidor.unam.mx [mailto:telecom at servidor.unam.mx]
Sent: 20 February 2004 01:18
To: Nic McCartney
Cc: juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] IQ ChSTM-1 channel capacity


On Thu, 19 Feb 2004, Nic McCartney wrote:

Thanks Nic, so is this something you have tested on JunOS 6.2? i've seen
previous documentation where the number was much lower so i just wanted to
get some url where this can be confirmed since 6.2 documents dont seem to
have a clear indication ...
Just need to confirm so we can get the exact number of PICs.. either one
or two.. small installation.. :)

> I believe the Q-PIC can have 768 channels.
>
> Nic
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of
> telecom at servidor.unam.mx
> Sent: 18 February 2004 20:27
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] IQ ChSTM-1 channel capacity
>
>
>
> Hi ... it's me again with the same question but now under 6.2.. apparently
> there was an improvement on the number of channels on 6.0 was increased to
> 336 but i can't find documentation on it.. Does anybody has any real
> experience with this PIC and its capacity.. thanks
>
> Daniel
>
>

--



More information about the juniper-nsp mailing list