[j-nsp] Juniper LDP issue.

[bageshri kundu]

Hi,
 
I am trying run some LDP conformance tests against a Juniper M10(Junos 6.0) on Ethernet interfaces. The basic tests fail because of the Initialization message sent by Juniper contains the standard CSP TLV & then an unknown TLV(type 0x8503) with some 14 bytes after it. I have not been able to figure out what this tlv is. It will be helpful if anyone could help me with this.
 
Thank you,
Bageshri



---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/juniper-nsp/attachments/20040107/5023e170/attachment.html