[j-nsp] 802.3ad between M5 & Cisco cat3750

[Niels Bakker]

>>Correct, an aggregated link must have "vlan-tagging" enabled.
>>
>>FWIW, on a Foundry switch the configuration is as simple as "trunk
>>server e 1 to 2" to configure an aggregated link.

* radams at siscom.net (Robert J. Adams (jason)) [Mon 26 Jan 2004, 22:41 CET]:
> So you didn't have to configure tagged vlans on the Foundry? What do you 
> have the vlan id set to on the juniper?

Well, of course you have to do that too.  The vlan-id's on the Juniper
match the configuration of the switch.  In this particular case:

!
vlan 110 by port
 tagged ethe 1 to 2
!
vlan 130 by port
 tagged ethe 1 to 2
!

... and configure the appropriate units on interface ae0 on the Juniper.


	-- Niels.

--