Fw: [j-nsp] Juniper M40 Overloaded?

[Dennis Ponne]

 He Erik ;),
>
>
> > Hi Dennis,
> >
> > On Wed, 2004-07-07 at 15:14, Dennis Ponne wrote:
> > > In the day time we have around 253.380kpps Load and we have severe
> packet
> > > loss threw the juniper's. Sometimes this KPPS flows up to 320.000 and
> then
> > > it's really bad.
> > >
> >
> > You probably got your measurements wrong somewhere, or you're reading
> > them wrong. I presume you're routing 253 Kpps, and not 253380 Kpps, you
> > should probably read the "." as a decimal floating point, with the .380
> > being 380 pps, NOT 380 Kpps
> >
>
 I think your right,

 Traffic statistics:                                           Current delta
   Input bytes:              6491210126660 (614919488 bps)       [972637156]
   Output bytes:             1252340055582 (115855984 bps)       [189441067]
   Input packets:               6385412203 (70726 pps)              [896664]
   Output packets:              7435446282 (126375 pps)            [1586493]


 This is my first gigabit interface, since we host 2 DNS root servers I
 expected the kpps would be high.

 Greetings,

 Dennis Ponne