[j-nsp] PIC hotswappable?

[Jonas Frey]

Hank,

thats incorrect. M40e PICs can be used in M160 and M320.
M40 PICs can only be used in M40 and M20. 
(Unofficially M5 and M10, too).

To use a M5/M10/M20/M40 pic in a M40e/M160/M320 you would need to remove
the case from the PICs...I dont recommend this :)

Regards,
Jonas

On Thu, 2004-07-15 at 20:58, Hank Nussbacher wrote:
> > I think it's just a physical problem, not an electrical one, as the
> > PICs are the same, and probably the FPC bus electronics as well.
> > Just the ejector is missing.
> 
> I was told by the same Juniper SE that M20 PICs can be placed in an M40e -
> but no higher, whereas M40e PICs can go up to the M320, so obviously there
> must be some difference between M20 and M40 PICs.
> 
> -Hank
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp