[j-nsp] Loopbacks per VRF or in inet.0

Bosco Sachanandani Bosco.Sachanandani at orange.co.in
Tue Jun 15 10:04:13 EDT 2004

Tried that as well but it does not work.... thanks anyways


-----Original Message-----
From: Paul Goyette [mailto:pgoyette at juniper.net]
Sent: Tuesday, June 15, 2004 7:08 PM
To: Bosco Sachanandani; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Loopbacks per VRF or in inet.0

Why not simply put multiple addresses on a single loopback interface?

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Bosco
Sent: Tuesday, June 15, 2004 6:39 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Loopbacks per VRF or in inet.0

hi all,

I just discovered that only one loopback interface can be part of a single
VRF or inet.0.

I was trying to add 2 loopbacks (unit 1 and unit 2) as part of the same VRF
but it fails. Anyone suggest why is it so ?

My requirement is that in one VRF I have 4 BGP peers (2 providers at 2
different POPs). I would like to use 1 loopback interface for one provider
and another loopback interface for the other.

This requirement is because one provider wants me to use the BGP peering IP
address from his IP range and hence would give me the IP.

Thanks in advance.


juniper-nsp mailing list juniper-nsp at puck.nether.net

More information about the juniper-nsp mailing list