[j-nsp] VRF: SNMP and NTP traffic

Harshit Kumar harshit at juniper.net
Wed Jun 16 23:15:17 EDT 2004

#1 is true.

#2 -->

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Yuki Arif
Sent: Wednesday, June 16, 2004 7:43 PM
To: 'juniper-nsp at puck.nether.net'; 'juniper at groupstudy.com'
Subject: [j-nsp] VRF: SNMP and NTP traffic

I am a newbie in Juniper router.
I have questions:
1. Is it true that NTP traffic and SNMP traffic, considered as
management traffic,  can be only sent/received via "inet.0" in Juniper
Router (M20) ?
2. If it is true, I have got one advice to work around this matter but I
do not know how the cli configuration look like. 
However, you can route the management traffic in a dedicated VRF, using
RIB groups to pass the routing information from the Inet.0 to the VRF.
Would you help me to answer above questions ?
Thanks in advance.....
Best Regards


juniper-nsp mailing list juniper-nsp at puck.nether.net

More information about the juniper-nsp mailing list