[j-nsp] Issues with 6.2R1.5

[Erik Haagsman]

Hi Wajahat,

What RE are you using?
What kind of errors are you getting exactly (printout would be
useful)..?  Do you see any other messages in your logs that might
indicate what's causing this...? ANy of your deamons spitting out
something useful in your logs..?

Cheers,

Erik

On Fri, 2004-03-19 at 18:07, Niaz, Wajahat wrote:
> Hi all
> 
> After upgrading to 6.2R1.5 I am getting memory errors on the M10.  We were
> running 4.4R3.4 for Years without having any problem and then Juniper told
> us to upgrade to 6.2 as they are not supporting 4.4 Release any more.  After
> the upgrade the memory errors were so intense that we had to shut down our
> transit interface. This router is running BGP and OSPF and is receiving full
> table from the transit provider.  Does anyone on mailing list point me to
> the right direction ? 
> 
> Also, I forgot to partition the hard disk after the upgrade but I don't
> think that has anything to do with this.
> 
> Any ideas ?
> 
> Thanks in advance
> 
> Wajahat
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
-- 
Erik Haagsman
Network Architect
We Dare BV
tel: +31(0)10-7507008
fax: +31(0)10-7507005
http://www.we-dare.nl