[j-nsp] Issues with 6.2R1.5

[Harshit Kumar]

Niaz,
      You should contact JTAC (support at juniper.net) to get it 
 resolved.

Cheers,
Harshit  

>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net 
>[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Niaz, Wajahat
>Sent: Friday, March 19, 2004 9:07 AM
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] Issues with 6.2R1.5 
>
>Hi all
>
>After upgrading to 6.2R1.5 I am getting memory errors on the 
>M10.  We were running 4.4R3.4 for Years without having any 
>problem and then Juniper told us to upgrade to 6.2 as they are 
>not supporting 4.4 Release any more.  After the upgrade the 
>memory errors were so intense that we had to shut down our 
>transit interface. This router is running BGP and OSPF and is 
>receiving full table from the transit provider.  Does anyone 
>on mailing list point me to the right direction ? 
>
>Also, I forgot to partition the hard disk after the upgrade 
>but I don't think that has anything to do with this.
>
>Any ideas ?
>
>Thanks in advance
>
>Wajahat
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net 
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>