[j-nsp] Load Balancing between two AS exit

[Harshit Kumar]

Hi jing,

Answer to question #1

MED (metric-out) can be set at protocols, group or neighbor level

Set protocols bgp metric-out ?
Set protocols bgp group <group-name> metric-out ?
Set protocols bgp group <group-name> neighbor <address> metric-out ?

Default MED is 0, lower the MED better it is.

But MED is only for inbound path selection.

- Harshit  

>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net 
>[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jing Shen
>Sent: Wednesday, March 24, 2004 6:10 PM
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] Load Balancing between two AS exit
>
>Hi,
> 
> 
>we have two M160 connecting to two border router in another AS.
>the outgoing link bandwidth of m160-1 is 2*2.5G and the other is 2.5G.
> 
>Now we want to set up load balancing between the two exit 
>path.(both incoming traffic and outgoing traffic). How could 
>we modify MED of BGP protocol advertising and how could we 
>distribute outgoing traffic according to outgoing link bandwidth?
> 
> 
>Regards
> 
>Jing Shen
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net 
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>