[j-nsp] JUNOS 6.2 and unsupported PIC combinations in one FPC

Matti Saarinen mjs at cc.tut.fi
Fri Mar 26 11:25:06 EST 2004


I know that starting from JUNOS 6.2 there are certain combination of
PICs that are not supported on a single FPC. The combinations are
listed on PSN-2004-02-016. 

Now, I have some difficulties in matching the output of show chassis
hardware command and the types of the PICs on the combination list.
So, should I run into any problems if I install 6.2 on a M10 which has
the following configuration?


FPC 0                                                    E-FPC
  PIC 0          REV 03   750-002977   HB7953            2x OC-3 ATM, MM
  PIC 1          REV 01   750-005090   HD1040            1x G/E, 1000 BASE-LX
  PIC 2          REV 02   750-004176   HG9442            12x FE, 100 BASE-TX
FPC 1                                                    E-FPC
  PIC 0          REV 01   750-005091   HD9785            1x G/E, 1000  BASE-SX
  PIC 1          REV 01   750-005091   HA5508            1x G/E, 1000  BASE-SX
  PIC 2          REV 01   750-002982   HB9366            1x Tunnel
 

Cheers,

-- 
- Matti -


More information about the juniper-nsp mailing list