[j-nsp] vlan-ccc and ip address configured on vlan

[Henrik Hansson]

Hej.

Jag hadde nog valt l2vpn istället för ccc är det någon speciell anledning
till ccc ?

/Henrik



On Mon, 24 May 2004, Peter L wrote:

> Hi
> I'm a bit new to juniper and trying fix a problem. I have a juniper as the
> border router for a network and the juniper has 4 different vlans connected
> to it and every vlan is connected to several physical interfaces at the same
> time.
>
> The juniper is supposed to be default gw for all these vlans. My problem is
> that I can't set the ip address on the vlans on the juniper and have the
> interface "ccc" enabled. I would like to have bridging between the different
> interfaces and use the juniper as default gw on every vlan. Is there another
> way to do it? Can I set the ip of the vlan as a loopback thing?
>
> my present configuration:
>
> peter at fredriksborg# show interfaces ge-1/0/0
> vlan-tagging;
> unit 5 {
>     description "lab network";
>     encapsulation vlan-ccc;
>     vlan-id 200;
>     family inet {
>         address 192.168.125.34/27;
>     }
>     family ccc;
> }
> unit 6 {
>     encapsulation extended-vlan-ccc;
>     vlan-id 300;
>     family ccc;
>
>  and I tried this:
>
> peter at fredriksborg# show interfaces ge-1/0/0
> vlan-tagging;
>
> encapsulation extended-vlan-ccc;
> unit 5 {
>     description "lab network";
>     vlan-id 200;
>     family inet {
>         address 192.168.125.34/27;
>     }
>     family ccc;
> }
> unit 6 {
>     vlan-id 300;
>     family ccc;
>
> on both occasions it complains when I commit check:
>
> [edit interfaces ge-1/0/0 unit 5]
>   'family'
> Only the CCC family is allowed on CCC interfaces
> error: configuration check-out failed
>
> I it possible to solve this?
>
> Thank you!
> /Peter
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>