[j-nsp] M20 RE/SSB broken?

Jonas Frey jf at probe-networks.de
Tue Nov 2 11:29:50 EST 2004


Hello,

we got a new M20 here which seems to have some wicked problem:
After booting the box, it spews out alot of error messages about the
SSB/RE connection beeing lost, this happens about 5-10 minutes after
beeing booted.


Message from syslogd@ ssb at Tue Nov  2 16:03:41 2004 ...
 ssb RDP: Remote side closed connection:
rdp.(scb:60417).(serverRouter:pfe) 

Message from syslogd@ ssb at Tue Nov  2 16:03:41 2004 ...
 ssb CM(0): ALARM SET: (Major) PFE/Master socket closed 

Message from syslogd@ ssb at Tue Nov  2 16:04:11 2004 ...
 ssb CM(0): Lost contact with master routing engine 

Message from syslogd@ ssb at Tue Nov  2 16:04:11 2004 ...
 ssb CM(0): Forwarding will cease in 5 minutes 

>From here it counts down in 30 second steps.

>From "show log messages" i can see:

Nov  2 16:04:09   /kernel: pfe_listener_timeout_func(): connection in
OPENING state for 300 secs: closing socket
Nov  2 16:04:09   /kernel: pfe_listener_disconnect: conn dropped:
listener idx=0, tnpaddr=0x2
Nov  2 16:04:09   chassisd[2425]: CHASSISD_SHUTDOWN_NOTICE: Shutdown
reason: SSB connection lost
Nov  2 16:04:09   ssb RDP: Remote side closed connection:
rdp.(scb:60417).(serverRouter:pfe)
Nov  2 16:04:09   chassisd[2425]: CHASSISD_IFDEV_DETACH_ALL_PSEUDO:
ifdev_detach(pseudo devices: all)
Nov  2 16:04:09   ssb PFEMAN: Master socket closed
Nov  2 16:04:09   alarmd[2426]: shutting down chassisd connection:
chassisd ipc pipe read error
Nov  2 16:04:09   ssb CM(0): ALARM SET: (Major) PFE/Master socket closed
Nov  2 16:04:09   craftd[2427]: craftd_user_conn_shutdown: socket 5,
errno = 0
Nov  2 16:04:09   alarmd[2426]: chassisd connection succeeded after 0
retries
Nov  2 16:04:09   alarmd[2426]: resending alarm state
Nov  2 16:04:09   craftd[2427]: chassisd connection succeeded after 0
retries
Nov  2 16:04:19   ssb CM(0): Lost contact with master routing engine
Nov  2 16:04:19   ssb CM(0): Forwarding will cease in 5 minutes
Nov  2 16:04:49   ssb CM(0): Lost contact with master routing engine
Nov  2 16:04:49   ssb CM(0): Forwarding will cease in 4 minutes, 30
seconds

I also just saw this message appearing, however only 1 time:
Nov  2 17:07:30  ssb CM(0): JTAG SCAN-IN FAILED: timeout

The above scenario PFE/Master RE shutting down is appearing about every
10 minutes so its somewhat flapping.
Any ideas whats wrong here, either SSB or RE or both?


Running 6.4R1.6


Regards,
Jonas Frey




More information about the juniper-nsp mailing list