[j-nsp] M20 RE/SSB broken? [solved]

Jonas Frey (Probe Networks) jf at probe-networks.de
Tue Nov 2 17:42:55 EST 2004


Hi,

after some suggestions (thanks!) i found the problem:
Its simply caused by not having any FPC in the system,
once i put one in all was fine.
Maybe Juniper should fix this in a upcoming release or atleast have junos
display a message that things wont work right if no fpc is inserted...

Regards,
Jonas


> Hello,
>
> we got a new M20 here which seems to have some wicked problem:
> After booting the box, it spews out alot of error messages about the
> SSB/RE connection beeing lost, this happens about 5-10 minutes after
> beeing booted.
>
>
> Message from syslogd@ ssb at Tue Nov  2 16:03:41 2004 ...
>  ssb RDP: Remote side closed connection:
> rdp.(scb:60417).(serverRouter:pfe)
>
> Message from syslogd@ ssb at Tue Nov  2 16:03:41 2004 ...
>  ssb CM(0): ALARM SET: (Major) PFE/Master socket closed
>
> Message from syslogd@ ssb at Tue Nov  2 16:04:11 2004 ...
>  ssb CM(0): Lost contact with master routing engine
>
> Message from syslogd@ ssb at Tue Nov  2 16:04:11 2004 ...
>  ssb CM(0): Forwarding will cease in 5 minutes
>
>>From here it counts down in 30 second steps.
>
>>From "show log messages" i can see:
>
> Nov  2 16:04:09   /kernel: pfe_listener_timeout_func(): connection in
> OPENING state for 300 secs: closing socket
> Nov  2 16:04:09   /kernel: pfe_listener_disconnect: conn dropped:
> listener idx=0, tnpaddr=0x2
> Nov  2 16:04:09   chassisd[2425]: CHASSISD_SHUTDOWN_NOTICE: Shutdown
> reason: SSB connection lost
> Nov  2 16:04:09   ssb RDP: Remote side closed connection:
> rdp.(scb:60417).(serverRouter:pfe)
> Nov  2 16:04:09   chassisd[2425]: CHASSISD_IFDEV_DETACH_ALL_PSEUDO:
> ifdev_detach(pseudo devices: all)
> Nov  2 16:04:09   ssb PFEMAN: Master socket closed
> Nov  2 16:04:09   alarmd[2426]: shutting down chassisd connection:
> chassisd ipc pipe read error
> Nov  2 16:04:09   ssb CM(0): ALARM SET: (Major) PFE/Master socket closed
> Nov  2 16:04:09   craftd[2427]: craftd_user_conn_shutdown: socket 5,
> errno = 0
> Nov  2 16:04:09   alarmd[2426]: chassisd connection succeeded after 0
> retries
> Nov  2 16:04:09   alarmd[2426]: resending alarm state
> Nov  2 16:04:09   craftd[2427]: chassisd connection succeeded after 0
> retries
> Nov  2 16:04:19   ssb CM(0): Lost contact with master routing engine Nov
>  2 16:04:19   ssb CM(0): Forwarding will cease in 5 minutes
> Nov  2 16:04:49   ssb CM(0): Lost contact with master routing engine Nov
>  2 16:04:49   ssb CM(0): Forwarding will cease in 4 minutes, 30 seconds
>
> I also just saw this message appearing, however only 1 time:
> Nov  2 17:07:30  ssb CM(0): JTAG SCAN-IN FAILED: timeout
>
> The above scenario PFE/Master RE shutting down is appearing about every
> 10 minutes so its somewhat flapping.
> Any ideas whats wrong here, either SSB or RE or both?
>
>
> Running 6.4R1.6
>
>
> Regards,
> Jonas Frey
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp






More information about the juniper-nsp mailing list