[j-nsp] Junos POS loopback command?

[Ran Liebermann]

user at host# set interfaces so-x/y/z sonet-options looback [remote |
local]

You can read this:
http://www.juniper.net/techpubs/software/nog/nog-interfaces/html/mcds3-l
oopback5.html

Regards,
--
Ran. 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Hank Nussbacher
> Sent: Thursday, November 04, 2004 09:43
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Junos POS loopback command?
> 
> What is the Junos equivelent of setting an IOS logical 
> loopback on a POS 
> interface:
> rtr(config-if)#loopback ?
>   internal  internal
>   line      line
> 
> Thanks,
> Hank
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 
>