[j-nsp] Junos POS loopback command?

Phil Shafer phil at juniper.net
Thu Nov 4 10:35:30 EST 2004


Ran Liebermann writes:
>user at host# set interfaces so-x/y/z sonet-options looback [remote | local]

FWIW, I use the "help apropos <regex>" command to help find lost
commands.  It searches all commands and help strings below the
current edit point and displays those that match.

    [edit interfaces]
    cli# help apropos loopback | match local    
    set <interface_name> sonet-options loopback <loopback> local 
        Local loopback
    set <interface_name> t3-options loopback <loopback> local 
        Local loopback
    set <interface_name> e3-options loopback <loopback> local 
        Local loopback
    set <interface_name> e1-options loopback <loopback> local 
        Local loopback
    set <interface_name> t1-options loopback <loopback> local 
        Local loopback
    set <interface_name> serial-options loopback <loopback> local 
        Local loopback
    set <interface_name> serial-options loopback <loopback> dce-local 
        DCE local loopback (DTE mode only)
    
    [edit interfaces]
    cli#

Thanks,
 Phil


More information about the juniper-nsp mailing list