[j-nsp] Missing routes in bgp.l3vpn.0 table

[Andrew Ramsey]

Hi,

Does client1 not receive them or does it receive them, but they are
hidden?  Common cause of the latter would be that client1 doesn't have a
"usable" next-hop to the RR (no LSP, etc...).

Andy

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Affandi Indraji
> Sent: Tuesday, November 09, 2004 4:56 AM
> To: J-nsp
> Subject: [j-nsp] Missing routes in bgp.l3vpn.0 table
> 
> 
> Hi,
> 
> Has anyone encounter this before?
> 
> Here is the scenario.
> 
> rc1 --- rr --- rc2
> 
> The route client1 doesn't received any routes advertisement 
> from route reflector even though the route reflector has sent 
> the routes to the route client1. While route client2, which 
> has the same configuration, receive the advertisement from 
> route reflector.
> 
> rc1-----------------------------------------------------------
> --------------
> -
> group RR {
>     type internal;
>     family inet {
>         unicast;
>     }
>     neighbor 10.1.1.4 {
>         local-address 10.1.1.81;
>         family inet {
>             unicast;
>         }
>         family inet-vpn {
>             unicast;
>         }
>     }
> }
> 
> show bgp sum
> 10.1.1.4     65232     121123      87742       0       8     
> 5:01:05 Establ
>   inet.0: 10256/75296/0
> -->  bgp.l3vpn.0: 0/0/0
> 
> rc2-----------------------------------------------------------
> --------------
> group RR {
> type internal;
> family inet {
>     unicast;
> }
> neighbor 10.1.1.4 {
>     local-address 10.1.1.82;
>     family inet {
>         unicast;
>     }
>     family inet-vpn {
>         unicast;
>     }
> }
> 
> 10.1.1.4     65232    5778389     959172       0       3     
> 4w5d13h Establ
>   inet.0: 87139/152181/0
> -->  bgp.l3vpn.0: 39/39/0
> 
> rr------------------------------------------------------------
> --------------
> group RC {
>     type internal;
>     family inet {
>         unicast;
>     }
>     cluster 1.1.1.1;
>     neighbor 10.1.1.82 {
>         preference 170;
>         local-address 10.1.1.4;
>         family inet {
>             unicast;
>         }
>         family inet-vpn {
>             unicast;
>         }
>         vpn-apply-export;
>     }
>     neighbor 10.1.1.81 {
>         preference 170;
>         local-address 10.1.1.4;
>         family inet {
>             unicast;
>         }
>         family inet-vpn {
>             unicast;
>         }
>         vpn-apply-export;
>     }
> }
> 
> 
> 10.1.1.81    65232      87964     137905       0       0     
> 5:08:08 Establ
>   inet.0: 76963/115144/0
>   bgp.l3vpn.0: 7/9/0
> 10.1.1.82    75232     244761    3849197       0       3     
> 4w5d13h Establ
>   inet.0: 27/28/0
>   bgp.l3vpn.0: 12/12/0
> 
> --------------------------------------------------------------
> --------------
> --
> 
> The strange thing is, It's been working for a while and there 
> is no changes on the config. And suddenly, rc1 doesn't 
> receive the advertisement from rr anymore.
> 
> This is what I have tried:
> 1. Reset the BGP session - still not work
> 2. remove the IPv4 bgp, so only run bgp-vpn - still not work
> 
> Is it a bug? anyone has experience this before?
> 
> Thank you.
> 
> Regards,
> Fandi
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
>