[j-nsp] Force SFMs to stay offline

Richard A Steenbergen ras at e-gerbil.net
Fri Nov 19 02:10:07 EST 2004


Is there a way to force an SFM to stay offline (say for example when the 
RAM starts to go bad and generate ECC errors for days, or until you send a 
tech out to pull the card)? It seems that if you disable it through 
"request chassis sfm slot <#> offline", it will automatically turn them 
all back on after you commit any config change.

I see a config option under "chassis sfm", which seems like it would be 
the place to put a "disable" option, but it doesn't seem to have any 
options at all:

# set chassis sfm ?
Possible completions:
  <slot>               SFM slot number (0..3)

# set chassis sfm 0 ?   
Possible completions:
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)


More information about the juniper-nsp mailing list