[j-nsp] Force SFMs to stay offline

Michael Lyngbøl michael at lyngbol.dk
Fri Nov 19 03:50:14 EST 2004


On 19.11.2004 02:10:07 +0000, Richard A Steenbergen wrote:
> Is there a way to force an SFM to stay offline (say for example when the 
> RAM starts to go bad and generate ECC errors for days, or until you send a 
> tech out to pull the card)? It seems that if you disable it through 
> "request chassis sfm slot <#> offline", it will automatically turn them 
> all back on after you commit any config change.

user at m160-re0> request chassis sfm slot 0 ?
Possible completions:
  offline              Take SFM offline
  online               Bring SFM online
  restart              Restart SFM

user at m160-re0> request chassis sfm slot 0 offline 
Offline initiated, use "show chassis sfm" to verify

user at m160-re0> show chassis sfm 
                     Temp  CPU Utilization (%)   Memory    Utilization (%)
Slot State            (C)  Total  Interrupt      DRAM (MB) Heap     Buffer
  0  Offline         --- Offlined by cli command ---
  1  Online            43      2          0        64        60         46
  2  Online            44      4          0        64        60         46
  3  Online            51      3          0        64        60         46

/Michael

-- 
Michael Lyngbøl -- michael at lyngbol dot dk
Network Architect, AS3292 TDC, IP·backbone


More information about the juniper-nsp mailing list