[j-nsp] PFE problems

Nisar Ali nisar at juniper.net
Tue Nov 23 23:12:32 EST 2004

On Wed, Nov 24, 2004 at 01:25:25AM +0100, Jonas Frey wrote:
> Hi,
> i am getting the following error all of a sudden on a M20:
> RT_PFE: NH IPC op 31 (CHANGE AGGREGATE NEXTHOP) failed, err 6 (No
> Memory)
> What does this mean/refer to? The memory of the routing engine is hardly
> 50% used.

The message can be logged if, for any reason, the next hop change
can not be completed (may be the next hop does not exist anymore). Any
other logs before this error log started showing up? Any change
in routes?

What JUNOS you are running? Could you share configuration, "show 
chassis hard"? Do you have aggregated intefaces configured? If 
yes how many, with number of component links? Can you send "
show route summary", "show route forwa summ".

> Regards,
> Jonas
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp

Nisar Ali
Network Engineering Team (NET)

More information about the juniper-nsp mailing list