[j-nsp] PFE problems

[Bostjan Fele]

That is memory on PFE, so on forwarding engine. Look for "show chassis feb"
and look for memory utilization.

Regards,
Bostjan

--------------------------------------------------------
Bostjan FELE
CCIE #12594, InfoSec, JNCIS-M
E-mail: bostjan.fele at smart-com.si
Smart Com, d.o.o.
Brnciceva 45, 1001 Ljubljana, Slovenia
URL: http://www.smart-com.si
Tel.:  +386-1-5308-312
Fax.: +386-1-5611-571
Mob.: +386-41-399-363
---------------------------------------------------------

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Nisar Ali
Sent: Wednesday, November 24, 2004 5:13 AM
To: Jonas Frey
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] PFE problems


On Wed, Nov 24, 2004 at 01:25:25AM +0100, Jonas Frey wrote:
> Hi,
>
> i am getting the following error all of a sudden on a M20:
>
> RT_PFE: NH IPC op 31 (CHANGE AGGREGATE NEXTHOP) failed, err 6 (No
> Memory)
>
> What does this mean/refer to? The memory of the routing engine is hardly
> 50% used.

The message can be logged if, for any reason, the next hop change
can not be completed (may be the next hop does not exist anymore). Any
other logs before this error log started showing up? Any change
in routes?

What JUNOS you are running? Could you share configuration, "show
chassis hard"? Do you have aggregated intefaces configured? If
yes how many, with number of component links? Can you send "
show route summary", "show route forwa summ".

Thanks.
  nisar

> Regards,
> Jonas
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp

--
================================================
Nisar Ali
Network Engineering Team (NET)
===============================================
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp