[j-nsp] PFE problems

[Piotr Marecki]

Hi ,

actually to see IPII lookup memory utilization one have to vty into FEB/SSB
and use "
one of the "cryptic" commands like "show jtree 0 memory" ,:
SSB0(lab-m20-1-re0 vty)# show jtree 0 memory
Memory Statistics:
   16777216 bytes total (4 banks)
     272480 bytes used
   16504736 bytes free
      16256 pages total
        264 pages used
      15992 pages free
         31 max freelist size

Of course it would be better to have it all documented :)

regards

Piotr Marecki
Netia S.A

----- Original Message ----- 
From: "Bostjan Fele" <bostjan.fele at smart-com.si>
To: "Nisar Ali" <nisar at juniper.net>; "Jonas Frey" <jf at probe-networks.de>
Cc: <juniper-nsp at puck.nether.net>
Sent: Wednesday, November 24, 2004 9:42 AM
Subject: RE: [j-nsp] PFE problems


> That is memory on PFE, so on forwarding engine. Look for "show chassis
feb"
> and look for memory utilization.
>
> Regards,
> Bostjan
>
> --------------------------------------------------------
> Bostjan FELE
> CCIE #12594, InfoSec, JNCIS-M
> E-mail: bostjan.fele at smart-com.si
> Smart Com, d.o.o.
> Brnciceva 45, 1001 Ljubljana, Slovenia
> URL: http://www.smart-com.si
> Tel.:  +386-1-5308-312
> Fax.: +386-1-5611-571
> Mob.: +386-41-399-363
> ---------------------------------------------------------
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Nisar Ali
> Sent: Wednesday, November 24, 2004 5:13 AM
> To: Jonas Frey
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] PFE problems
>
>
> On Wed, Nov 24, 2004 at 01:25:25AM +0100, Jonas Frey wrote:
> > Hi,
> >
> > i am getting the following error all of a sudden on a M20:
> >
> > RT_PFE: NH IPC op 31 (CHANGE AGGREGATE NEXTHOP) failed, err 6 (No
> > Memory)
> >
> > What does this mean/refer to? The memory of the routing engine is hardly
> > 50% used.
>
> The message can be logged if, for any reason, the next hop change
> can not be completed (may be the next hop does not exist anymore). Any
> other logs before this error log started showing up? Any change
> in routes?
>
> What JUNOS you are running? Could you share configuration, "show
> chassis hard"? Do you have aggregated intefaces configured? If
> yes how many, with number of component links? Can you send "
> show route summary", "show route forwa summ".
>
> Thanks.
>   nisar
>
> > Regards,
> > Jonas
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
>
> --
> ================================================
> Nisar Ali
> Network Engineering Team (NET)
> ===============================================
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>