[j-nsp] RIP MD5 Key ID

[Daniel Roesen]

On Tue, Oct 26, 2004 at 12:02:13AM +0200, Daniel Roesen wrote:
> On Mon, Oct 25, 2004 at 10:21:04PM +0200, Daniel Roesen wrote:
> > On Mon, Oct 25, 2004 at 03:37:00PM -0400, Ed_Wingert at 3com.com wrote:
> > > Does anyone know how to define a Key ID for RIP MD5 Authentication on the
> > > Juniper M40 running version 6.4R1.6?
> > 
> > set protocols rip authentication-type md5
> > set protocols rip authentication-key ...
> 
> OK, I do see the problem now, and I was unable to get RIP working
> between a Cisco IOS 12.2(25)S1 and JunOS 6.4R2. RFC2082 clearly defines
> the key identifier, which IOS does implement with the "key <number>"
> statement in the key chain definition. Even using a key ID 0 on IOS
> side to trick around JunOS probably setting the key identifier field
> to zero doesn't help to get communication between IOS and JunOS going.
> 
> Whatever JunOS implements there... it's not RFC2082 compliant as far
> as I can see.
> 
> Sorry Ed, looks like a real JunOS problem.

Hm, any comments from Juniper folks perhaps? This looks like a real
interop showstopper.


Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0