[j-nsp] STM-1 to HSSI

[Janto Cin]

Hi,
It is M series.
Rgrds,
Janto

-----Original Message-----
From: "Martin Robinson" <Martin at networkhardware.com>
To: "Janto Cin" <jantocin at datacomm.co.id>
Date: Wed, 1 Sep 2004 04:24:14 -0700
Subject: RE: [j-nsp] STM-1 to HSSI

> Hello Janto,
> 
> Which Juniper are using is it M series or E series.
> 
> Regards Martin.
> 
>  
> ___________________________________________________
> 
> Martin Robinson
> Network Hardware Resale, LLC 
> Merchants Court 
> Singaporestraat 66
> 1175 RA Lijnden
> The Netherlands
> www.networkhardware.com <http://www.networkhardware.com/> 
> 
> Direct: +31 (0) 20 449 6927
> Fax: +31 (0) 20 449 6923
> martin at networkhardware.com <mailto:martin at networkhardware.com>  
> AIM: martinNHR 
> Network Hardware Resale 
> "The World's Largest Resource for Pre-Owned and
> Used CISCO Network Hardware"
> __________________________________________________
> 
> Click here <http://www.networkhardware.com/optout.aspx>  if you prefer
> not to receive future e-mail from Network Hardware Resale.
> Click here <http://www.networkhardware.com/privacy.aspx>  to view our
> privacy policy.
> 
> 
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Janto Cin
> Sent: Wednesday, September 01, 2004 12:29 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] STM-1 to HSSI
> 
> 
> Hi,
>  
> What PIC should we use for connecting to HSSI interface of the
> satellite
> modem?
> Can we use STM-1 PIC? Do I need HSSI to STM-1 converter then? Which
> converter do you recommend?
>  
> TIA.
> Janto
>  
>  
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp