[j-nsp] Multicast configuration

[Christian Malo]

Instance: PIM.master

Name                   Stat Mode       IP V State Count DR address
fe-0/0/3.11            Up   Dense       4 2 NotDR     1 *.*.*.*
ge-0/1/0.991           Up   Dense       4 2 DR        0 *.*.*.*
lo0.0                  Up   Dense       4 2 DR        0 *.*.*.*

ge-0/1/0.991 is the streaming server.

fe-0/0/0 is the PC.

traceoptions {
    file pim size 500k files 4;
    flag hello detail;
    flag rp detail;
}
dense-groups {
    224.0.1.39/32;
    224.0.1.40/32;
}
interface lo0.0 {
    mode dense;
    version 2;
}
interface ge-0/1/0.991 {
    mode dense;
    version 2;
}
interface fe-0/0/0.0 {
    mode dense;
    version 2;
}
interface fxp0.0 {
    disable;
}

[edit protocols]
chris at core1.mtl1# show igmp
traceoptions {
    file igmp;
    flag leave detail;
    flag report detail;
    flag query detail;
    flag state detail;
    flag normal detail;
}
query-response-interval 5;
interface ge-0/1/0.991 {
    version 3;
    static {
        group 224.123.123.100;
        group 224.123.123.101;
        group 224.123.123.102;
        group 224.123.123.103;
        group 224.123.123.104;
    }
}


On Wed, 22 Sep 2004, Harry Reynolds wrote:

> You are correct. A TS PIC is not needed for PIM DM.
>
> Perhaps some configuration snips from the Juniper and the OP of show pim
> interfaces commands would get things rolling?
>
> Regards
>
>
>
>
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
> > Christian Malo
> > Sent: Wednesday, September 22, 2004 8:27 AM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] Multicast configuration
> >
> > Hi list,
> >
> > I have to start doing some multicast on my backbone. As a 1st
> > step I want to do a basic setup using PIM-DM.
> >
> > I currently have:
> >
> > stream-server <-> 6509 <-> Juniper <-> 6509 <-> PC
> >
> > it's the same 6509 on 2 different vlans and IGMP is enabled
> > on the 6509.
> >
> >
> > I tried to do some basic igmp/pim configuration and it still
> > doesn't work.
> > I know that the streaming via multicast works because when I
> > put my pc on the same vlan I get the streaming fine via the
> > multicast feed.
> >
> > I was just wondering if any of you guys had a simple config
> > for that kind of setup.
> >
> > I'm also wondering if I need a TS PIC. From what I read, I
> > will only need it when I start doing PIM-SM.
> >
> >
> > The router is receiving:
> >
> > Sep 22 11:23:58 IGMP RECV *.*.*.* -> 224.123.123.102 V2
> > Membership Report: group 224.123.123.102 length 8
> >
> > but nothing happens afterwards.
> >
> >
> > -chris
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>