[j-nsp] Multicast configuration

[Harry Reynolds]

Also, it strikes me that the static joins are on the wrong interface. The
joins should point to the PC, which you identify as being on fe-0/0/0. Joins
are not needed for the sender.....

 

> -----Original Message-----
> From: Christian Malo [mailto:chris at fiberpimp.net] 
> Sent: Wednesday, September 22, 2004 8:41 AM
> To: Harry Reynolds
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] Multicast configuration
> 
> 
> 
> Instance: PIM.master
> 
> Name                   Stat Mode       IP V State Count DR address
> fe-0/0/3.11            Up   Dense       4 2 NotDR     1 *.*.*.*
> ge-0/1/0.991           Up   Dense       4 2 DR        0 *.*.*.*
> lo0.0                  Up   Dense       4 2 DR        0 *.*.*.*
> 
> ge-0/1/0.991 is the streaming server.
> 
> fe-0/0/0 is the PC.
> 
> traceoptions {
>     file pim size 500k files 4;
>     flag hello detail;
>     flag rp detail;
> }
> dense-groups {
>     224.0.1.39/32;
>     224.0.1.40/32;
> }
> interface lo0.0 {
>     mode dense;
>     version 2;
> }
> interface ge-0/1/0.991 {
>     mode dense;
>     version 2;
> }
> interface fe-0/0/0.0 {
>     mode dense;
>     version 2;
> }
> interface fxp0.0 {
>     disable;
> }
> 
> [edit protocols]
> chris at core1.mtl1# show igmp
> traceoptions {
>     file igmp;
>     flag leave detail;
>     flag report detail;
>     flag query detail;
>     flag state detail;
>     flag normal detail;
> }
> query-response-interval 5;
> interface ge-0/1/0.991 {
>     version 3;
>     static {
>         group 224.123.123.100;
>         group 224.123.123.101;
>         group 224.123.123.102;
>         group 224.123.123.103;
>         group 224.123.123.104;
>     }
> }
> 
> 
> On Wed, 22 Sep 2004, Harry Reynolds wrote:
> 
> > You are correct. A TS PIC is not needed for PIM DM.
> >
> > Perhaps some configuration snips from the Juniper and the 
> OP of show 
> > pim interfaces commands would get things rolling?
> >
> > Regards
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: juniper-nsp-bounces at puck.nether.net
> > > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Christian 
> > > Malo
> > > Sent: Wednesday, September 22, 2004 8:27 AM
> > > To: juniper-nsp at puck.nether.net
> > > Subject: [j-nsp] Multicast configuration
> > >
> > > Hi list,
> > >
> > > I have to start doing some multicast on my backbone. As a 
> 1st step I 
> > > want to do a basic setup using PIM-DM.
> > >
> > > I currently have:
> > >
> > > stream-server <-> 6509 <-> Juniper <-> 6509 <-> PC
> > >
> > > it's the same 6509 on 2 different vlans and IGMP is 
> enabled on the 
> > > 6509.
> > >
> > >
> > > I tried to do some basic igmp/pim configuration and it 
> still doesn't 
> > > work.
> > > I know that the streaming via multicast works because 
> when I put my 
> > > pc on the same vlan I get the streaming fine via the 
> multicast feed.
> > >
> > > I was just wondering if any of you guys had a simple 
> config for that 
> > > kind of setup.
> > >
> > > I'm also wondering if I need a TS PIC. From what I read, 
> I will only 
> > > need it when I start doing PIM-SM.
> > >
> > >
> > > The router is receiving:
> > >
> > > Sep 22 11:23:58 IGMP RECV *.*.*.* -> 224.123.123.102 V2 
> Membership 
> > > Report: group 224.123.123.102 length 8
> > >
> > > but nothing happens afterwards.
> > >
> > >
> > > -chris
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> >
>