[j-nsp] Banners

Steve Holman sholman at juniper.net
Fri Apr 1 11:06:00 EST 2005


Hi Tariq,
 
Not sure what you're getting at.  The command you reference displays the banner at login for me.  See below:
 
xxxxxx$ telnet xxxxx1
Trying x.x.x.x...
Connected to xxxxx1.
Escape character is '^]'.
 
 
    *********************************************************
    *                                                       *
    *                      WARNING!!!!!                     *
    *                                                       *
    *       xxxxxxx  xxxxxx xxxxxxx   xxxxxxxx    xxxx      *
    *         xxxx xxxx xxxxxx xxxxx xxxxx xxxxx xxxx       *
    *                                                       *
    *                                                       *
    *                      WARNING!!!!!                     *
    *                                                       *
    *********************************************************
 
 
 
xxxxx1 (ttyp0)
login: 
 
 
Provided below is the configuration:
 
system {
    login {
        message "WARNING!!!!.....";
    }
}

Not sure why it doesn't work for you.

Cheers,

Steve

________________________________

From: juniper-nsp-bounces at puck.nether.net on behalf of Rasheeduddin, Tariq
Sent: Fri 4/1/2005 7:06 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Banners



The command 'set system log message "MESSAGE"' creates a banner that is displayed after a login.

In the Cisco world this is called the EXEC banner. There is another banner called the MOTD which shows up before the user login prompt. Is there an equivalent in JunOS?

TR-

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list