[j-nsp] If thousands of L2 vpn - ethernet vlan between a samepairof PE & same pair of ethernet port ?

[Dang Le Hai]

In this case, CE must support for stacking vlan. But not sure M box will 
accept this stacking vlan ethernet frame or not ?

----- Original Message ----- 
From: "Chuck R. Anderson" <cra at wpi.edu>
To: "juniper list" <juniper-nsp at puck.nether.net>
Sent: Friday, April 08, 2005 9:39 AM
Subject: Re: [j-nsp] If thousands of L2 vpn - ethernet vlan between a 
samepairof PE & same pair of ethernet port ?


> On Fri, Apr 08, 2005 at 09:29:22AM +0700, Dang Le Hai wrote:
>> That's nice with junoscript.
>>
>> But besides junoscript, do we have any better way of config l2 vpn in 
>> this
>> specific scenario ?
>
> Isn't there a way to do VLAN-in-VLAN tags (VLAN stacking), so you can
> configure a single L2 VPN circuit and encapsulate multiple VLANs over
> it?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp