[j-nsp] Re: Problem with routing FastEthernet (2.1)

Daniel Roesen dr at cluenet.de
Wed Apr 13 07:55:11 EDT 2005

On Wed, Apr 13, 2005 at 04:43:49AM -0700, Aviva Garrett wrote:
> If you disable the fxp0 interface, routing won't work. This is an
> internal interface between all the packet forwarding engine (all the
> chassis hardware components) and the routing routing software, which 
> runs on the routing engine.

Nope, that's fxp1. fxp0 is the management ethernet...

Best regards,

CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0

More information about the juniper-nsp mailing list