[j-nsp] M-20 to 3750 LACP config

[sthaug at nethelp.no]

> Thanks to everyone who responded. I had to do a couple of things, seperate 
> people had suggested to get it working on my hardware. One was to make the 
> Juniper side passive and the Cisco side active. No other combination seemed 
> to work. Also, I had to add a unit 0 to the Juniper in order for it's ae0 
> interface to come up/up. Below is a working configuration example. Thanks!

It works for us with both sides active. 12.2(25)SE on the Cisco,
7.1R2.2 on the Juniper.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no