[j-nsp] MTU size of fxp0

[Jonas Frey]

As far as i recall, it can be done using some (sysctl -w
net.pfe.transit_re=1 ?) sysctl setting. However this is not a good idea
since the routing will be done in software/go through the RE directly.

Jonas

On Tue, 2005-04-26 at 10:53, sthaug at nethelp.no wrote:
> > Actually this is an comparison trial between Juniper and Cisco.
> > I have modified the Cisco's managemnet port MTU from 1500 
> > to 9216, and it could be a routed port. So I also want to try it 
> > on the Juniper. If I succeed, I would have more than one routed
> > port. :)
> 
> There is no point in trying to modify the MTU of fxp0, since it
> cannot be used for normal routing.
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp