[j-nsp] M10i commist sysc failed

Phil Shafer phil at juniper.net
Wed Aug 10 11:37:46 EDT 2005

jjsyed at aol.com writes:
>When we try to do "commit sync" on M10i's after making changes, the
>operation does not complete. It takes for ever.

The original timeouts were insanely large (hours).  Modern sw
versions (7.2) trim it to something reasonable (seconds).  This
was PR 55247.

This is assuming the other RE is up and working correctly, and
that the sw version difference between the REs isn't too big
a bump.


More information about the juniper-nsp mailing list