[j-nsp] monitor interface statistics

Jeroen Valcke jeroen.valcke at belnet.be
Thu Aug 11 10:29:24 EDT 2005


Hello,

When monitoring a GigE interface (f.e. ge-0/1/0) you get Traffic and
Error statistics in the command output. However when monitoring a
subinterface (f.e.  ge-0/1/0.0) there are three sections
Local/Remote/Traffic statistics. What's the meaning of the different
sections?  What's the conclusion if in one of does sections the counters
remain zero?

Searched the Juniper site for more info on this but if it's on the site
they have hidden it very well ;-)

Best regards,
-Jeroen-

-- 
Jeroen Valcke


More information about the juniper-nsp mailing list