[j-nsp] Routing-instances with different AS'es

[Alexander Arsenyev (GU/ETL)]

local-as?
Code snippet is located at the bottom of this page
http://www.juniper.net/techpubs/software/junos/junos74/swconfig74-routin
g/html/bgp-config38.html#1015734 . It's not routing-instance specific
but You could add own RI before "protocols bgp".
HTH
Cheers
Alex

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jonas Frey
Sent: 21 December 2005 13:09
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Routing-instances with different AS'es

Hello,

i am just reading through the docs and am trying to figure out howto run
a second AS inside a routing-instance. 
What i want to do is basically:

Router runs with AS65000, got full bgp tables etc.
Now i want to "add" a second AS in a seperate routing-instance which is
AS65001. This AS65001 should then announce 10.0.0.0/8 towards AS65000
which then advertises this to its peers.
10.0.0.0/8 is connected locally on a fe interface.


Anyone got a code sniplet which i may use?

Regards,
Jonas 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp